DX UV Series 15-50W_富通尼激光科技（东莞）有限公司

Model	DX-355-15	DX-355-20	DX-355-28	DX-355-40	DX-355-50
Average Power	15W@50kHz	20W@50kHz	28W@60kHz	40W@60kHz	50W@70kHz
Pulse Energy	~0.3mJ	~0.4mJ	~0.6mJ	~1mJ	~1mJ
Pulse Width (nominal)	12±3 ns @50kHz
Repetition Rate	Single Shot to 200 kHz (Option to 300kHz)
Pulse to Pulse Stability	< 2% rms
Polarization Ratio	Horizontal; > 100:1
4σ Beam Diameter @ exit	~0.6 mm**			~2.5mm
Beam Divergence (Full Angle Far Field)	<1.5 mrad
Beam Circularity at exit	~ 90%
Spatial Mode	TEM00 M²<1.2
Beam Pointing Stability	< 25 μrad
Long Term Stability (8 hr ± 1° C)	< ±2%

† Lower rep rates (<30kHz) performance achieved by pulse energy capping
**Larger beam diameters (up to ~3mm) available with expansion option.

未找到相应参数组，请于后台属性模板中添加

Model	DX-355-15	DX-355-28	DX-355-40	DX-355-50
Line Frequency	50 to 60 Hz
Electrical Requirement	100 to 240V AC
Warm Up Time	<15 minutes from stand by, <30 minutes from cold start
Relative Humidity	Non-condensing, 90% Max
Power Consumption (excluding chiller)	<240 W typical	<320 W typical	<420 W typical	<600 W typical
Ambient Temperature	15°C to 35°C (59° to 95°F) Operating Range
Interface	Ethernet / RS 232 / GUI / External TTL Triggering
Storage Conditions	-10°C to 40°C; Sea Level to 12,000 m; 0% to 90% RH, non-condensing