DX Green Series 25-100W_富通尼激光科技（东莞）有限公司

Model	DX-532-25	DX-532-35	DX-532-48	DX-532-70	DX-532-100
Wavelength	532 nm
Average Power	25W@50kHz	35W@100kHz	48W@100kHz	70W@100kHz	100W@100kHz
Pulse Energy	~0.9mJ	~0.6mJ	~1mJ	~1.5mJ	~1.9mJ
Pulse Width (nominal)	22 ± 3 ns @50kHz	10 ± 3 ns @50kHz	12 ± 3 ns @50kHz	15 ± 3 ns @50kHz	25 ± 3 ns @100kHz
Repetition Rate†	Single Shot to 500 kHz (option to 1 MHz)
Pulse to Pulse Stability	< 2% rms
Polarization Ratio	Vertical; >500:1
4σ Beam Diameter @ exit	~0.7 mm	~1mm
Beam Divergence (Full Angle Far Field)	< 1.5 mrad	<3 mrad
Beam Circularity	~ 90%
Spatial Mode	TEM00 M²<1.1	TEM00 M²<1.2
Beam Pointing Stability	< 25 μrad
Long Term Stability (8 hr ± 1° C)	< ±2%

† Lower rep rates (<30kHz) performance achieved by pulse energy capping.

未找到相应参数组，请于后台属性模板中添加

Model	DX-532-25	DX-532-48	DX-532-70
Line Frequency	50 to 60 Hz
Electrical Requirement	100 to 240V AC
Relative Humidity	Non-condensing, 90% Max
Ambient Temperature	15°C to 35°C (59° to 95°F)
Storage Conditions	-10°C to 40°C; Sea Level to 12,000 m; 0% to 90% RH, non-condensing
Power Consumption (excluding chiller)	< 240 W typical	< 320 W typical	< 420 W typical
Warm Up Time	<15 min from standby, <30 min from cold start
Interface	Ethernet / RS 232 / GUI / External TTL Triggering